(Xojo Plugin) AEAD AES 128-bit GCM

Demonstrates AES encryption using the Galois/Counter Mode (GCM). GCM is an authenticated encryption mode with "additional data" (often referred to as AEAD). GCM is a cipher mode that can be applied to any symmetric encryption algorithm with a 16-byte block size, such as AES and Twofish. In GCM mode, the block encryption algorithm is transformed into a stream encryption algorithm, and therefore no padding occurs (and the PaddingScheme property does not apply). The "additional data" (known as the AAD) does not get encrypted but plays a role in the computation of the resulting "authenticated tag".

Chilkat Xojo Plugin Download Xojo Plugin for Windows, Linux, Mac OS X, and ARM, ARM64

// This example assumes the Chilkat API to have been previously unlocked.
// See Global Unlock Sample for sample code.

Dim crypt As New Chilkat.Crypt2

// Set the encryption algorithm to "AES"	
crypt.CryptAlgorithm = "aes"

// Indicate that the Galois/Counter Mode (GCM) should be used:
crypt.CipherMode = "gcm"

// KeyLength may be 128, 192, 256
crypt.KeyLength = 128

// This is the 128-bit AES secret key (in hex format)
Dim K As String
K = "feffe9928665731c6d6a8f9467308308"

// This is the 16-byte initialization vector:
Dim IV As String
IV = "cafebabefacedbaddecaf888"

// This is the additional data to be used as input to the GCM AEAD algorithm,
// but is not included in the output.  It plays a role in the computation of the
// resulting authenticated tag.
Dim AAD As String
AAD = "feedfacedeadbeeffeedfacedeadbeefabaddad2"

// The plain-text bytes (in hex format) to be encrypted.
Dim PT As String
PT = "d9313225f88406e5a55909c5aff5269a86a7a9531534f7da2e4c303d8a318a721c3c0c95956809532fcf0e2449a6b525b16aedf5aa0de657ba637b39"

// The expected cipher text (in hex format)
Dim CT As String
CT = "42831ec2217774244b7221b784d0d49ce3aa212f2c02a4e035c17e2329aca12e21d514b25466931c7d8f6a5aac84aa051ba30b396a0aac973d58e091"

// The expected authenticated tag given the above inputs.
Dim T As String
T = "5bc94fbc3221a5db94fae95ae7121a47"

// Note: The above data are the values for test vector #4 from 
// the PDF document at: http://csrc.nist.gov/groups/ST/toolkit/BCM/documents/proposedmodes/gcm/gcm-spec.pdf

// EncodingMode specifies the encoding of the output for
// encryption, and the input for decryption.
// It may be "hex", "url", "base64", or "quoted-printable".
crypt.EncodingMode = "hex"

// Set the secret key and IV
crypt.SetEncodedIV IV,"hex"
crypt.SetEncodedKey K,"hex"

// Set the additional authenticated data (AAD)
Dim success As Boolean
success = crypt.SetEncodedAad(AAD,"hex")

// For the purpose of duplicating the test vectors, we are using the EncryptEncoded method.
// This method decodes the input string according to the encoding specified by the EncodingMode
// property, which in this case is "hex".  The decoded bytes are encrypted using the mode specified
// by the CipherMode property.  The resulting
// encrypted bytes are encoded (again using the encoding mode specified by EncodingMode),
// and the result is returned.
// <b>Note:</b> The CipherMode property sets the block mode of operation (gcm, cfb, cbc, ofb, ecb, etc.) 
// for any of the Chilkat encryption/decryption methods (such as EncryptBytes, EncryptString, 
// CkEncryptFile, etc.)   Just because GCM mode is demonstrated with EncryptEncoded/DecryptEncoded,
// does not imply that GCM mode is specific to only these methods.
Dim ctResult As String
ctResult = crypt.EncryptEncoded(PT)
If (crypt.LastMethodSuccess <> True) Then
    System.DebugLog(crypt.LastErrorText)
    Return
End If

// Examine the result.  It should be the same (case insensitive) as our expected result:
System.DebugLog("computed result: " + ctResult)
System.DebugLog("expected result: " + CT)

// Examine the authenticated tag. It should be the same (case insensitive) as our expected authenticated tag:
Dim tResult As String
tResult = crypt.GetEncodedAuthTag("hex")
System.DebugLog("computed authTag: " + tResult)
System.DebugLog("expected authTag: " + T)

// -------------------------------------------------------------------------------------
// Now let's GCM decrypt...
// -------------------------------------------------------------------------------------

// Before GCM decrypting, we must set the authenticated tag to the value that is expected.
// The decryption will fail if the resulting authenticated tag is not equal (case insensitive) to 
// the expected result.
// Note: The return value of SetEncodedAuthTag indicates whether the string passed was a valid
// representation of the encoding specified in the 2nd arg.
success = crypt.SetEncodedAuthTag(T,"hex")

// All of our properties (IV, secret key, cipher mode, and AAD) are already set from the code above...

// So let's decrypt CT to and check to see if we get PT.
Dim ptResult As String
ptResult = crypt.DecryptEncoded(CT)
If (crypt.LastMethodSuccess <> True) Then
    // Failed.  The resultant authenticated tag did not equal the expected authentication tag.
    System.DebugLog(crypt.LastErrorText)
    Return
End If

// Examine the decrypted result.  It should be the same as our expected plaintext (case insensitive)
System.DebugLog("plaintext decrypted: " + ptResult)
System.DebugLog("plaintext expected:  " + PT)

// Let's intentionally set the expected authenticated tag to an incorrect value. 
// The decrypt operation should fail:
Dim tInvalid As String
tInvalid = "ffaabbbc3221a5db94fae95ae7121a47"

success = crypt.SetEncodedAuthTag(tInvalid,"hex")

ptResult = crypt.DecryptEncoded(CT)
If (crypt.LastMethodSuccess <> True) Then
    // Failed.  The resultant authenticated tag did not equal the expected authentication tag.
    System.DebugLog(crypt.LastErrorText)
End If