(VB.NET UWP/WinRT) Send a WebSocket Ping Control Frame

Ping and Pong messages are the heartbeat of websockets. See Pings and Pongs

"At any point after the handshake, either the client or the server can choose to send a ping to the other party. When the ping is received, the recipient must send back a pong as soon as possible. You can use this to make sure that the client is still connected, for example. A ping or pong is just a regular frame, but it's a control frame. Pings have an opcode of 0x9, and pongs have an opcode of 0xA. When you get a ping, send back a pong with the exact same Payload Data as the ping (for pings and pongs, the max payload length is 125). You might also get a pong without ever sending a ping; ignore this if it happens."

This example demonstrates how to send a Ping in the midst of sending a message.

Note: The websockets.chilkat.io server imposes the following limitations:
Messages must be 16K or less, and each connection is limited to a max of 16 echoed messages.

Chilkat Universal Windows Platform (UWP) / WinRT Downloads Chilkat for the Universal Windows Platform (UWP)

' This example requires the Chilkat API to have been previously unlocked.
' See Global Unlock Sample for sample code.

Dim ws As New Chilkat.WebSocket

' The PongAutoConsume property is True by default.  This means that any Pong frames that are received 
' will automatically be consumed, and the ReadFrame method will continue reading the next incoming frame before it returns.
ws.PongAutoConsume = True

' For brevity, this example does not check for errors when etablishing the WebSocket connection.
' See Establish WebSocket Connection for more complete sample code for making the connection.

Dim rest As New Chilkat.Rest
' Connect to websockets.chilkat.io
' IMPORTANT: websockets.chilkat.io accepts frames of up to 16K in size and echoes them back.
' IMPORTANT: The websockets.chilkat.io server imposes the following limitations: 
' ---------- Messages must be 16K or less, and each connection is limited to a max of 16 echoed messages.
Dim success As Boolean = Await rest.ConnectAsync("websockets.chilkat.io",80,False,False)
ws.UseConnection(rest)
ws.AddClientHeaders()
Dim responseBodyIgnored As String = Await rest.FullRequestNoBodyAsync("GET","/wsChilkatEcho.ashx")
success = ws.ValidateServerHandshake()
If (success <> True) Then
    Debug.WriteLine(ws.LastErrorText)
    Exit Sub
End If


' This example sends a multi-frame message to the Chilkat echo server, and reads the response.
' In the midst of sending the message, we'll send a Ping control frame.  The server should respond with a Pong frame,
' and we'll automatically consume it.

' Send the 1st frame in the message.
Dim finalFrame As Boolean = False
success = Await ws.SendFrameAsync("This is the 1st frame" & vbCrLf,finalFrame)
If (success <> True) Then
    Debug.WriteLine(ws.LastErrorText)
    Exit Sub
End If


' Let's send a Ping frame here...
success = Await ws.SendPingAsync("This is a ping")
If (success <> True) Then
    Debug.WriteLine(ws.LastErrorText)
    Exit Sub
End If


' Send the 2nd frame in the message.
success = Await ws.SendFrameAsync("This is the 2nd frame" & vbCrLf,finalFrame)
If (success <> True) Then
    Debug.WriteLine(ws.LastErrorText)
    Exit Sub
End If


' Send the 3rd and final frame in the message.
finalFrame = True
success = Await ws.SendFrameAsync("This is the 3rd and final frame" & vbCrLf,finalFrame)
If (success <> True) Then
    Debug.WriteLine(ws.LastErrorText)
    Exit Sub
End If



' Read an incoming frames until we receive the final frame.
' Note: It may be that the echo server (websockets.chilkat.io) responds with 
' the full message in a single final frame.
' 
' The Pong response will be consumed automatically because the PongAutoConsume property is True.
' Therefore, we don't need to worry about handling an incoming Pong.
Dim receivedFinalFrame As Boolean = False
While receivedFinalFrame = False

    success = Await ws.ReadFrameAsync()
    If (success <> True) Then
        Debug.WriteLine("Failed to receive a frame")
        Debug.WriteLine("ReadFrame fail reason = " & ws.ReadFrameFailReason)
        Debug.WriteLine(ws.LastErrorText)
        Exit Sub
    End If


    receivedFinalFrame = ws.FinalFrame

    ' Show the opcode and final frame bit for the frame just received:
    Debug.WriteLine("Frame opcode: " & ws.FrameOpcode)
    Debug.WriteLine("Final frame: " & receivedFinalFrame)
    Debug.WriteLine("--")
End While

' Return the message accumulated in the above calls to ReadFrame.
Dim receivedMsg As String = ws.GetFrameData()
Debug.WriteLine("Received: " & receivedMsg)


' Close the websocket connection.
success = Await ws.SendCloseAsync(True,1000,"Closing this websocket.")
If (success <> True) Then
    Debug.WriteLine(ws.LastErrorText)
    Exit Sub
End If


' Read the Close response.
success = Await ws.ReadFrameAsync()
If (success <> True) Then
    Debug.WriteLine("ReadFrame fail reason = " & ws.ReadFrameFailReason)
    Debug.WriteLine(ws.LastErrorText)
    Exit Sub
End If


' Should receive the "Close" opcode.
Debug.WriteLine("Received opcode: " & ws.FrameOpcode)
' Should be the same status code we sent (1000)
Debug.WriteLine("Received close status code: " & ws.CloseStatusCode)
' The server may echo the close reason.  If not, this will be empty.
Debug.WriteLine("Echoed close reason: " & ws.CloseReason)

Debug.WriteLine("Success.")