Unicode C

hacienda.go.cr Refrescar un Token

See more hacienda.go.cr Examples

Refreshes an access token for the Recepción de Comprobantes Electrónicos del Ministerio de Hacienda (Costa Rica) Unicode C

#include <C_CkJsonObjectW.h>
#include <C_CkHttpW.h>
#include <C_CkHttpRequestW.h>
#include <C_CkHttpResponseW.h>
#include <C_CkStringBuilderW.h>

void ChilkatSample(void)
    {
    BOOL success;
    HCkJsonObjectW jsonToken;
    HCkHttpW http;
    HCkHttpRequestW req;
    HCkHttpResponseW resp;
    HCkStringBuilderW sbResponseBody;
    HCkJsonObjectW jResp;
    int respStatusCode;
    const wchar_t *access_token;
    int expires_in;
    const wchar_t *id_token;
    int not_before_policy;
    int refresh_expires_in;
    const wchar_t *refresh_token;
    const wchar_t *session_state;
    const wchar_t *token_type;

    success = FALSE;

    // This example assumes the Chilkat API to have been previously unlocked.
    // See Global Unlock Sample for sample code.

    // It is assumed we previously obtained an OAuth2 access token.
    // This example loads the JSON access token file 
    // saved by this example: Get hacienda.co.cr OAuth2 Access Token

    jsonToken = CkJsonObjectW_Create();
    success = CkJsonObjectW_LoadFile(jsonToken,L"qa_data/tokens/hacienda_cr.json");
    if (success != TRUE) {
        wprintf(L"Failed to load constantContact.json\n");
        CkJsonObjectW_Dispose(jsonToken);
        return;
    }

    // The access token JSON looks like this:

    // {
    //   "access_token": "ey....",
    //   "expires_in": 300,
    //   "id_token": "ey....",
    //   "not-before-policy": 0,
    //   "refresh_expires_in": 1800,
    //   "refresh_token": "ey...",
    //   "session_state": "...",
    //   "token_type": "bearer"
    // }

    http = CkHttpW_Create();

    // Implements the following CURL command:

    // curl -X "POST" "https://idp.comprobanteselectronicos.go.cr/auth/realms/rut-stag/protocol/openid-connect/token" \
    //  -H "Content-Type: application/x-www-form-urlencoded; charset=utf-8" \
    //  --data-urlencode "client_id=api-stag" \
    //  --data-urlencode "refresh_token=ey..." \
    //  --data-urlencode "grant_type=refresh_token"

    // Use the following online tool to generate HTTP code from a CURL command
    // Convert a cURL Command to HTTP Source Code

    req = CkHttpRequestW_Create();
    CkHttpRequestW_putHttpVerb(req,L"POST");
    CkHttpRequestW_putPath(req,L"/auth/realms/rut-stag/protocol/openid-connect/token");
    CkHttpRequestW_putContentType(req,L"application/x-www-form-urlencoded");
    CkHttpRequestW_AddParam(req,L"client_id",L"api-stag");
    CkHttpRequestW_AddParam(req,L"refresh_token",CkJsonObjectW_stringOf(jsonToken,L"refresh_token"));
    CkHttpRequestW_AddParam(req,L"grant_type",L"refresh_token");

    resp = CkHttpResponseW_Create();
    success = CkHttpW_HttpReq(http,L"https://idp.comprobanteselectronicos.go.cr/auth/realms/rut-stag/protocol/openid-connect/token",req,resp);
    if (success == FALSE) {
        wprintf(L"%s\n",CkHttpW_lastErrorText(http));
        CkJsonObjectW_Dispose(jsonToken);
        CkHttpW_Dispose(http);
        CkHttpRequestW_Dispose(req);
        CkHttpResponseW_Dispose(resp);
        return;
    }

    sbResponseBody = CkStringBuilderW_Create();
    CkHttpResponseW_GetBodySb(resp,sbResponseBody);
    jResp = CkJsonObjectW_Create();
    CkJsonObjectW_LoadSb(jResp,sbResponseBody);
    CkJsonObjectW_putEmitCompact(jResp,FALSE);

    wprintf(L"Response Body:\n");
    wprintf(L"%s\n",CkJsonObjectW_emit(jResp));

    respStatusCode = CkHttpResponseW_getStatusCode(resp);
    wprintf(L"Response Status Code = %d\n",respStatusCode);
    if (respStatusCode >= 400) {
        wprintf(L"Response Header:\n");
        wprintf(L"%s\n",CkHttpResponseW_header(resp));
        wprintf(L"Failed.\n");
        CkJsonObjectW_Dispose(jsonToken);
        CkHttpW_Dispose(http);
        CkHttpRequestW_Dispose(req);
        CkHttpResponseW_Dispose(resp);
        CkStringBuilderW_Dispose(sbResponseBody);
        CkJsonObjectW_Dispose(jResp);
        return;
    }

    // Sample JSON response:
    // (Sample code for parsing the JSON response is shown below)

    // {
    //   "access_token": "ey....",
    //   "expires_in": 300,
    //   "id_token": "ey....",
    //   "not-before-policy": 0,
    //   "refresh_expires_in": 1800,
    //   "refresh_token": "ey...",
    //   "session_state": "...",
    //   "token_type": "bearer"
    // }

    // Sample code for parsing the JSON response...
    // Use the following online tool to generate parsing code from sample JSON:
    // Generate Parsing Code from JSON

    // Chilkat functions returning "const char *" return a pointer to temporary internal memory owned and managed by Chilkat.
    // See this example explaining how this memory should be used: const char * functions.

    access_token = CkJsonObjectW_stringOf(jResp,L"access_token");
    expires_in = CkJsonObjectW_IntOf(jResp,L"expires_in");
    id_token = CkJsonObjectW_stringOf(jResp,L"id_token");
    not_before_policy = CkJsonObjectW_IntOf(jResp,L"not-before-policy");
    refresh_expires_in = CkJsonObjectW_IntOf(jResp,L"refresh_expires_in");
    refresh_token = CkJsonObjectW_stringOf(jResp,L"refresh_token");
    session_state = CkJsonObjectW_stringOf(jResp,L"session_state");
    token_type = CkJsonObjectW_stringOf(jResp,L"token_type");

    // Save the new JSON access token response to a file.
    success = CkJsonObjectW_WriteFile(jResp,L"qa_data/tokens/haciendda_cr.json");


    CkJsonObjectW_Dispose(jsonToken);
    CkHttpW_Dispose(http);
    CkHttpRequestW_Dispose(req);
    CkHttpResponseW_Dispose(resp);
    CkStringBuilderW_Dispose(sbResponseBody);
    CkJsonObjectW_Dispose(jResp);

    }