Tcl Requires Chilkat v11.0.0+

Amazon Pay - Capture Charge

See more Amazon Pay Examples

Capture payment on a Charge in the Authorized state. A successful Capture will move the Charge from Authorized to Captured state. Tcl

load ./chilkat.dll

set success 0

#  This example assumes the Chilkat API to have been previously unlocked.
#  See Global Unlock Sample for sample code.

set http [new_CkHttp]

#  Implements the following CURL command:

#  curl "https://pay-api.amazon.com/:version/charges/:chargeId/capture" \
#  -X POST
#  -H "authorization:Px2e5oHhQZ88vVhc0DO%2FsShHj8MDDg%3DEXAMPLESIGNATURE"
#  -H "x-amz-pay-date:20201012T235046Z"
#  -H "x-amz-pay-idempotency-key:AVLo5tI10BHgEk2jEXAMPLEKEY"
#  -d '{
#      "captureAmount": {
#          "amount": "14.00",
#          "currencyCode": "USD"
#      },
#      "softDescriptor": "Descriptor"
#  }'

#  Use the following online tool to generate HTTP code from a CURL command
#  Convert a cURL Command to HTTP Source Code

#  Use this online tool to generate code from sample JSON:
#  Generate Code to Create JSON

#  The following JSON is sent in the request body.

#  {
#      "captureAmount": {
#          "amount": "14.00",
#          "currencyCode": "USD"
#      },
#      "softDescriptor": "Descriptor"
#  }

set json [new_CkJsonObject]

CkJsonObject_UpdateString $json "captureAmount.amount" "14.00"
CkJsonObject_UpdateString $json "captureAmount.currencyCode" "USD"
CkJsonObject_UpdateString $json "softDescriptor" "Descriptor"

#  Load your Amazon Pay private key.  
#  There are many other ways to load private keys into the Chilkat private key object, such as from different formats,
#  or from in-memory strings or bytes.
set privKey [new_CkPrivateKey]

set success [CkPrivateKey_LoadPemFile $privKey "C:/someDir/myAmazonPayPrivateKey.pem"]
if {$success == 0} then {
    puts [CkPrivateKey_lastErrorText $privKey]
    delete_CkHttp $http
    delete_CkJsonObject $json
    delete_CkPrivateKey $privKey
    exit
}

#  Provide your Amazon Pay private key and Public Key ID 
#  Use your public key ID here.  It must be the one associated with the private key.
#  Note: The SetAuthPrivateKey method was added in Chilkat v9.5.0.89
set publicKeyId "SANDBOX-AHEGSJCM3L2S637RBGABLAFW"
set success [CkHttp_SetAuthPrivateKey $http $publicKeyId $privKey]
if {$success == 0} then {
    puts [CkHttp_lastErrorText $http]
    delete_CkHttp $http
    delete_CkJsonObject $json
    delete_CkPrivateKey $privKey
    exit
}

#  Note: When the private key is provided as shown above, Chilkat will automatically add the required x-amz-pay-* headers to the HTTP request,
#  and will also sign the request.  Nothing more is needed.
#  Chilkat automatically generates and adds the following headers:
#  
#  x-amz-pay-date
#  x-amz-pay-host
#  x-amz-pay-region
#  x-amz-pay-idempotency-key
#  Authorization

CkHttp_put_Accept $http "application/json"

set success [CkHttp_SetUrlVar $http "chargeId" "P21-1111111-1111111"]

#  To use the live system, replace "sandbox" with "live" in the URL passed to HttpJson.
#  Also, make sure to use the correct region: pay-api.amazon.com, pay-api.amazon.eu, or pay-api.amazon.jp
set resp [new_CkHttpResponse]

set success [CkHttp_HttpJson $http "POST" "https://pay-api.amazon.eu/sandbox/v2/charges/{$chargeId}/capture" $json "application/json" $resp]
if {$success == 0} then {
    puts [CkHttp_lastErrorText $http]
    delete_CkHttp $http
    delete_CkJsonObject $json
    delete_CkPrivateKey $privKey
    delete_CkHttpResponse $resp
    exit
}

set sbResponseBody [new_CkStringBuilder]

CkHttpResponse_GetBodySb $resp $sbResponseBody
set jResp [new_CkJsonObject]

CkJsonObject_LoadSb $jResp $sbResponseBody
CkJsonObject_put_EmitCompact $jResp 0

#  If the status code is not equal to 200, this will display error information.
puts "Response Body:"
puts [CkJsonObject_emit $jResp]

set respStatusCode [CkHttpResponse_get_StatusCode $resp]
puts "Response Status Code = $respStatusCode"
if {$respStatusCode != 200} then {
    puts "Failed."
    delete_CkHttp $http
    delete_CkJsonObject $json
    delete_CkPrivateKey $privKey
    delete_CkHttpResponse $resp
    delete_CkStringBuilder $sbResponseBody
    delete_CkJsonObject $jResp
    exit
}

#  Sample JSON response:
#  (Sample code for parsing the JSON response is shown below)

#  {
#       "chargeId": "P21-1111111-1111111-C111111",
#       "chargePermissionId": "P21-1111111-1111111",
#       "chargeAmount":{
#           "amount": "14.00",
#           "currencyCode": "USD"
#       },
#       "captureAmount": {
#           "amount": "14.00",
#           "currencyCode": "USD"
#       },
#       "refundedAmount": {
#           "amount": "0.00",
#           "currencyCode": "USD"
#       },
#       "convertedAmount": "14.00",
#       "conversionRate": "1.00",
#       "softDescriptor": "Descriptor",
#       "merchantMetadata": null,
#       "providerMetadata": {
#           "providerReferenceId": null
#       },
#       "statusDetails":{
#           "state": "Captured",
#           "reasonCode": null,
#           "reasonDescription": null,
#           "lastUpdatedTimestamp": "20190714T155300Z"
#       },
#       "creationTimestamp": "20190714T155300Z",
#       "expirationTimestamp": "20190715T155300Z",
#       "releaseEnvironment": "Sandbox"
#  }

#  Sample code for parsing the JSON response...
#  Use the following online tool to generate parsing code from sample JSON:
#  Generate Parsing Code from JSON

set chargeId [CkJsonObject_stringOf $jResp "chargeId"]
set chargePermissionId [CkJsonObject_stringOf $jResp "chargePermissionId"]
set chargeAmountAmount [CkJsonObject_stringOf $jResp "chargeAmount.amount"]
set chargeAmountCurrencyCode [CkJsonObject_stringOf $jResp "chargeAmount.currencyCode"]
set captureAmountAmount [CkJsonObject_stringOf $jResp "captureAmount.amount"]
set captureAmountCurrencyCode [CkJsonObject_stringOf $jResp "captureAmount.currencyCode"]
set refundedAmountAmount [CkJsonObject_stringOf $jResp "refundedAmount.amount"]
set refundedAmountCurrencyCode [CkJsonObject_stringOf $jResp "refundedAmount.currencyCode"]
set convertedAmount [CkJsonObject_stringOf $jResp "convertedAmount"]
set conversionRate [CkJsonObject_stringOf $jResp "conversionRate"]
set softDescriptor [CkJsonObject_stringOf $jResp "softDescriptor"]
set merchantMetadata [CkJsonObject_stringOf $jResp "merchantMetadata"]
set providerMetadataProviderReferenceId [CkJsonObject_stringOf $jResp "providerMetadata.providerReferenceId"]
set statusDetailsState [CkJsonObject_stringOf $jResp "statusDetails.state"]
set statusDetailsReasonCode [CkJsonObject_stringOf $jResp "statusDetails.reasonCode"]
set statusDetailsReasonDescription [CkJsonObject_stringOf $jResp "statusDetails.reasonDescription"]
set statusDetailsLastUpdatedTimestamp [CkJsonObject_stringOf $jResp "statusDetails.lastUpdatedTimestamp"]
set creationTimestamp [CkJsonObject_stringOf $jResp "creationTimestamp"]
set expirationTimestamp [CkJsonObject_stringOf $jResp "expirationTimestamp"]
set releaseEnvironment [CkJsonObject_stringOf $jResp "releaseEnvironment"]

delete_CkHttp $http
delete_CkJsonObject $json
delete_CkPrivateKey $privKey
delete_CkHttpResponse $resp
delete_CkStringBuilder $sbResponseBody
delete_CkJsonObject $jResp