(Ruby) Etsy OAuth1 Authorization

See more Etsy Examples

Demonstrates 3-legged OAuth1 authorization for Etsy.

For more information, see https://www.etsy.com/developers/documentation/getting_started/oauth

Chilkat Ruby Downloads install from rubygems.org gem install chilkat or download... Ruby Library for Windows, MacOS, Linux, Alpine Linux

require 'chilkat'

consumerKey = "keystring"
consumerSecret = "shared_secret"

# Specify one or more SPACE separated scopes as query params in the requestTokenUrl
# See https://www.etsy.com/developers/documentation/getting_started/oauth#section_permission_scopes
requestTokenUrl = "https://openapi.etsy.com/v2/oauth/request_token?scope=email_r%20listings_r%20listings_w%20listings_d"
authorizeUrl = "https://www.etsy.com/oauth/signin"
accessTokenUrl = "https://openapi.etsy.com/v2/oauth/access_token"

# The port number is picked at random. It's some unused port that won't likely conflict with anything else..
callbackUrl = "http://localhost:3017/"
callbackLocalPort = 3017

# The 1st step in 3-legged OAuth1.0a is to send a POST to the request token URL to obtain an OAuth Request Token
http = Chilkat::CkHttp.new()

http.put_OAuth1(true)
http.put_OAuthConsumerKey(consumerKey)
http.put_OAuthConsumerSecret(consumerSecret)
http.put_OAuthCallback(callbackUrl)

req = Chilkat::CkHttpRequest.new()
# resp is a CkHttpResponse
resp = http.PostUrlEncoded(requestTokenUrl,req)
if (http.get_LastMethodSuccess() != true)
    print http.lastErrorText() + "\n";
    exit
end

# If successful, the resp.BodyStr contains something like this:  
# login_url=https%3A%2F%2Fwww.etsy.com%2Foauth%2Fsignin%3Foauth_consumer_key%3D9ad9l1omxzbwfr2niq0ce1ly%26oauth_token%3D7116b4d0c72c2736561853d9e50113%26service%3Dv2_prod&oauth_token=7116b4d0c72c2736561853d9e50113&oauth_token_secret=3b7612b5d3&oauth_callback_confirmed=true&oauth_consumer_key=9ad9l1omxzbwfr2niq0ce1ly&oauth_callback=http%3A%2F%2Flocalhost%3A3017%2F
print resp.bodyStr() + "\n";

# We'll need this for later..
hashTab = Chilkat::CkHashtable.new()
hashTab.AddQueryParams(resp.bodyStr())

requestToken = hashTab.lookupStr("oauth_token")
requestTokenSecret = hashTab.lookupStr("oauth_token_secret")
http.put_OAuthTokenSecret(requestTokenSecret)

print "oauth_token = " + requestToken + "\n";
print "oauth_token_secret = " + requestTokenSecret + "\n";

# ---------------------------------------------------------------------------
# The next step is to form a URL to send to the authorizeUrl
# This is an HTTP GET that we load into a popup browser.
sbUrlForBrowser = Chilkat::CkStringBuilder.new()
sbUrlForBrowser.Append(authorizeUrl)
sbUrlForBrowser.Append("?")
sbUrlForBrowser.Append(resp.bodyStr())
url = sbUrlForBrowser.getAsString()

# When the url is loaded into a browser, the response from Etsy will redirect back to localhost:3017
# We'll need to start a socket that is listening on port 3017 for the callback from the browser.
listenSock = Chilkat::CkSocket.new()

backLog = 5
success = listenSock.BindAndListen(callbackLocalPort,backLog)
if (success != true)
    print listenSock.lastErrorText() + "\n";
    exit
end

# Wait for the browser's connection in a background thread.
# (We'll send load the URL into the browser following this..)
# Wait a max of 60 seconds before giving up.
maxWaitMs = 60000
# task is a CkTask
task = listenSock.AcceptNextConnectionAsync(maxWaitMs)
task.Run()

# ****************************************************************
# At this point, your application should load the URL in a browser.
# For example, 
# in C#: System.Diagnostics.Process.Start(url);
# in Java: Desktop.getDesktop().browse(new URI(url));
# in VBScript: Set wsh=WScript.CreateObject("WScript.Shell")
#              wsh.Run url
# in Xojo: ShowURL(url)  (see http://docs.xojo.com/index.php/ShowURL)
# in Dataflex: Runprogram Background "c:\Program Files\Internet Explorer\iexplore.exe" sUrl        
# The Google account owner would interactively accept or deny the authorization request.

# Add the code to load the url in a web browser here...
# Add the code to load the url in a web browser here...
# Add the code to load the url in a web browser here...
# System.Diagnostics.Process.Start(url);
# ****************************************************************

# Wait for the listenSock's task to complete.
success = task.Wait(maxWaitMs)
if (!success or (task.get_StatusInt() != 7) or (task.get_TaskSuccess() != true))
    if (!success)
        # The task.LastErrorText applies to the Wait method call.
        print task.lastErrorText() + "\n";
    else
        # The ResultErrorText applies to the underlying task method call (i.e. the AcceptNextConnection)
        print task.status() + "\n";
        print task.resultErrorText() + "\n";
    end

    exit
end

# If we get to this point, the connection from the browser arrived and was accepted.

# We no longer need the listen socket...
# Stop listening on port 3017.
listenSock.Close(10)

# First get the connected socket.
sock = Chilkat::CkSocket.new()
sock.LoadTaskResult(task)

# Read the start line of the request..
startLine = sock.receiveUntilMatch("\r\n")
if (sock.get_LastMethodSuccess() != true)
    print sock.lastErrorText() + "\n";
    exit
end

# Read the request header.
requestHeader = sock.receiveUntilMatch("\r\n\r\n")
if (sock.get_LastMethodSuccess() != true)
    print sock.lastErrorText() + "\n";
    exit
end

# The browser SHOULD be sending us a GET request, and therefore there is no body to the request.
# Once the request header is received, we have all of it.
# We can now send our HTTP response.
sbResponseHtml = Chilkat::CkStringBuilder.new()
sbResponseHtml.Append("<html><body><p>Chilkat thanks you!</b></body</html>")

sbResponse = Chilkat::CkStringBuilder.new()
sbResponse.Append("HTTP/1.1 200 OK\r\n")
sbResponse.Append("Content-Length: ")
sbResponse.AppendInt(sbResponseHtml.get_Length())
sbResponse.Append("\r\n")
sbResponse.Append("Content-Type: text/html\r\n")
sbResponse.Append("\r\n")
sbResponse.AppendSb(sbResponseHtml)

sock.SendString(sbResponse.getAsString())
sock.Close(50)

# The information we need is in the startLine.
# For example, the startLine will look like this:
#  GET /?oauth_token=a3bc8bec84acc31418b68a532e9511&oauth_verifier=b5558d37 HTTP/1.1
sbStartLine = Chilkat::CkStringBuilder.new()
sbStartLine.Append(startLine)
numReplacements = sbStartLine.Replace("GET /?","")
numReplacements = sbStartLine.Replace(" HTTP/1.1","")
sbStartLine.Trim()

# oauth_token=a3bc8bec84acc31418b68a532e9511&oauth_verifier=b5558d37
print "startline: " + sbStartLine.getAsString() + "\n";

hashTab.Clear()
hashTab.AddQueryParams(sbStartLine.getAsString())

requestToken = hashTab.lookupStr("oauth_token")
authVerifier = hashTab.lookupStr("oauth_verifier")

# ------------------------------------------------------------------------------
# Finally , we must exchange the OAuth Request Token for an OAuth Access Token.

http.put_OAuthToken(requestToken)
http.put_OAuthVerifier(authVerifier)
# resp is a CkHttpResponse
resp = http.PostUrlEncoded(accessTokenUrl,req)
if (http.get_LastMethodSuccess() != true)
    print http.lastErrorText() + "\n";
    exit
end

# Make sure a successful response was received.
if (resp.get_StatusCode() != 200)
    print resp.statusLine() + "\n";
    print resp.header() + "\n";
    print resp.bodyStr() + "\n";
    exit
end

# If successful, the resp.BodyStr contains something like this:
# oauth_token=7898d7ba280dc791586dcfd26b37a9&oauth_token_secret=f2a7c267aa
print resp.bodyStr() + "\n";

hashTab.Clear()
hashTab.AddQueryParams(resp.bodyStr())

accessToken = hashTab.lookupStr("oauth_token")
accessTokenSecret = hashTab.lookupStr("oauth_token_secret")

# The access token + secret is what should be saved and used for
# subsequent REST API calls.
print "Access Token = " + accessToken + "\n";
print "Access Token Secret = " + accessTokenSecret + "\n";

# Save this access token for future calls.
# Just in case we need user_id and screen_name, save those also..
json = Chilkat::CkJsonObject.new()
json.AppendString("oauth_token",accessToken)
json.AppendString("oauth_token_secret",accessTokenSecret)

fac = Chilkat::CkFileAccess.new()
fac.WriteEntireTextFile("qa_data/tokens/etsy.json",json.emit(),"utf-8",false)

print "Success." + "\n";