(CkPython) Create XAdES using Smart Card or USB Token

Demonstrates how to create an XAdES signed XML document using a certificate located on a smartcard or USB token.

Note: This example requires Chilkat v9.5.0.75 or greater. Also, at the time of this writing this example is restricted to the Windows operating system.

Chilkat Python Downloads install with pip pip3 install chilkat or download... Python Module for Windows, MacOS, Linux, Alpine Linux, Solaris

import sys
import chilkat

# ----------------------------------------------------------------------
# IMPORTANT: This generated example requires Chilkat v9.5.0.75 or later.
# Contact support@chilkatsoft.com for a pre-release.
# ----------------------------------------------------------------------

# Load the XML to be signed.
xmlToSign = chilkat.CkXml()
success = xmlToSign.LoadXmlFile("qa_data/fattura_electronica/docToSign.xml")
if (success != True):
    print(xmlToSign.lastErrorText())
    sys.exit()

gen = chilkat.CkXmlDSigGen()

gen.put_SigLocation("p:FatturaElettronica")
gen.put_SigId("xmldsig-6f4b994a-7191-4bb1-ab3c-17549515b504")
gen.put_SigNamespacePrefix("ds")
gen.put_SigNamespaceUri("http://www.w3.org/2000/09/xmldsig#")
gen.put_SigValueId("xmldsig-6f4b994a-7191-4bb1-ab3c-17549515b504-sigvalue")
gen.put_SignedInfoCanonAlg("C14N")
gen.put_SignedInfoDigestMethod("sha256")

# Create an Object to be added to the Signature.
# Note: Chilkat will automatically populate the strings indicated by "TO BE GENERATED BY CHILKAT" with actual/correct values
# when the XML is signed.
object1 = chilkat.CkXml()
object1.put_Tag("xades:QualifyingProperties")
object1.AddAttribute("xmlns:xades","http://uri.etsi.org/01903/v1.3.2#")
object1.AddAttribute("xmlns:xades141","http://uri.etsi.org/01903/v1.4.1#")
object1.AddAttribute("Target","#xmldsig-6f4b994a-7191-4bb1-ab3c-17549515b504")
object1.UpdateAttrAt("xades:SignedProperties",True,"Id","xmldsig-6f4b994a-7191-4bb1-ab3c-17549515b504-signedprops")
object1.UpdateChildContent("xades:SignedProperties|xades:SignedSignatureProperties|xades:SigningTime","TO BE GENERATED BY CHILKAT")
object1.UpdateAttrAt("xades:SignedProperties|xades:SignedSignatureProperties|xades:SigningCertificateV2|xades:Cert|xades:CertDigest|ds:DigestMethod",True,"Algorithm","http://www.w3.org/2001/04/xmlenc#sha256")
object1.UpdateChildContent("xades:SignedProperties|xades:SignedSignatureProperties|xades:SigningCertificateV2|xades:Cert|xades:CertDigest|ds:DigestValue","TO BE GENERATED BY CHILKAT")
object1.UpdateChildContent("xades:SignedProperties|xades:SignedSignatureProperties|xades:SigningCertificateV2|xades:Cert|xades:IssuerSerialV2","TO BE GENERATED BY CHILKAT")

gen.AddObject("",object1.getXml(),"","")

# -------- Reference 1 --------
gen.put_KeyInfoId("xmldsig-6f4b994a-7191-4bb1-ab3c-17549515b504-keyinfo")
gen.AddSameDocRef("xmldsig-6f4b994a-7191-4bb1-ab3c-17549515b504-keyinfo","sha256","","","")

# -------- Reference 2 --------
gen.AddSameDocRef("","sha256","","","")
gen.SetRefIdAttr("","xmldsig-6f4b994a-7191-4bb1-ab3c-17549515b504-ref0")

# -------- Reference 3 --------
gen.AddObjectRef("xmldsig-6f4b994a-7191-4bb1-ab3c-17549515b504-signedprops","sha256","","","http://uri.etsi.org/01903#SignedProperties")

# ----------------------------------------------------------------
#  Load a certificate that has been pre-installed on the Windows system
#  This includes certificates on smartcards and USB tokens
cert = chilkat.CkCert()

#  You may provide the PIN here..
cert.put_SmartCardPin("000000")

# Load the certificate on the smartcard currently in the reader (or on the USB token).
# Pass an empty string to allow Chilkat to automatically choose the CSP (Cryptographi Service Provider).
# See Load Certificate on Smartcard for information about explicitly selecting a particular CSP.
success = cert.LoadFromSmartcard("")
if (success != True):
    print(cert.lastErrorText())
    sys.exit()

gen.SetX509Cert(cert,True)
gen.put_KeyInfoType("X509Data")
gen.put_X509Type("Certificate")

# Load XML to be signed...
sbXml = chilkat.CkStringBuilder()
xmlToSign.GetXmlSb(sbXml)

gen.put_Behaviors("IndentedSignature,ForceAddEnvelopedSignatureTransform")

# Sign the XML...
success = gen.CreateXmlDSigSb(sbXml)
if (success != True):
    print(gen.lastErrorText())
    sys.exit()

# Save the signed XMl to a file.
success = sbXml.WriteFile("qa_output/signedXml.xml","utf-8",False)

print(sbXml.getAsString())

# ----------------------------------------
# Verify the signature we just produced...
verifier = chilkat.CkXmlDSig()
success = verifier.LoadSignatureSb(sbXml)
if (success != True):
    print(verifier.lastErrorText())
    sys.exit()

verified = verifier.VerifySignature(True)
if (verified != True):
    print(verifier.lastErrorText())
    sys.exit()

print("This signature was successfully verified.")