PowerShell Requires Chilkat v11.7.0+
PowerShell
Stripe: Match an automatic bank payout to its transactions
See more Stripe Examples
Reconcile a selected automatic payout by comparing its amount with the sum of its settlement entries across all result pages.
Stripe documentation and cURL example
Chilkat PowerShell Downloads
Add-Type -Path "C:\chilkat\ChilkatDotNet47-x64\ChilkatDotNet47.dll"
$success = $false
# Requires an unlocked Chilkat bundle. See Global Unlock Sample.
# Supply a restricted sandbox key from merchant-controlled configuration.
$apiKey = "YOUR_STRIPE_TEST_KEY"
$curl = New-Object Chilkat.HttpCurl
$cmd = New-Object Chilkat.StringBuilder
$json = New-Object Chilkat.JsonObject
# Example UTC interval: 1 October 2026 inclusive through 1 November exclusive.
$fromTime = "1790812800"
$untilTime = "1793491200"
$selectedPayout = "po_SELECTED_BANK_DEPOSIT"
$expectedAmount = ""
$currency = ""
$pageSuffix = New-Object Chilkat.StringBuilder
$more = $true
$cursor = ""
while (($more -eq $true)) {
# curl -X GET "https://api.stripe.com/v1/payouts?created%5Bgte%5D={fromTime}&created%5Blt%5D={untilTime}&limit=100" \
# -u "$STRIPE_API_KEY:" \
# -H "Stripe-Version: 2026-10-28.endive"
$cmd.SetString("curl -X GET `"https://api.stripe.com/v1/payouts?created%5Bgte%5D=@FROM@&created%5Blt%5D=@UNTIL@&limit=100@CURSOR@`"")
$cmd.Append(" -u `"@KEY@:`"")
$cmd.Append(" -H `"Stripe-Version: 2026-10-28.endive`"")
$replaced = $cmd.Replace("@CURSOR@",$pageSuffix.GetAsString())
$replaced = $cmd.Replace("@FROM@",$fromTime)
$replaced = $cmd.Replace("@UNTIL@",$untilTime)
$replaced = $cmd.Replace("@KEY@",$apiKey)
$success = $curl.DoYourThing($cmd.GetAsString())
if ($success -ne $true) {
$("No HTTP response. Chilkat failure code: " + $curl.FailReason)
exit
}
$success = $curl.GetResponseJson($json)
if (($curl.StatusCode -ne 200) -or ($success -ne $true)) {
$("Stripe HTTP " + $curl.StatusCode + " Request-Id: " + $curl.GetResponseHeaderField("Request-Id"))
if ($success -eq $true) {
$($json.StringOf("error.message"))
}
exit
}
$i = 0
$count = $json.SizeOfArray("data")
while (($i -lt $count)) {
$json.I = $i
$($json.StringOf("data[i].id") + " | " + $json.StringOf("data[i].amount") + " | " + $json.StringOf("data[i].currency") + " | " + $json.StringOf("data[i].reconciliation_status"))
if ($json.StringOf("data[i].id") -eq $selectedPayout) {
if (($json.BoolOf("data[i].automatic") -ne $true) -or ($json.StringOf("data[i].reconciliation_status") -ne "completed")) {
$("Select an automatic payout with completed reconciliation.")
exit
}
$expectedAmount = $json.StringOf("data[i].amount")
$currency = $json.StringOf("data[i].currency")
}
$i = $i + 1
}
$more = $json.BoolOf("has_more")
if ($more -eq $true) {
$next = $json.StringOf("data[i].id")
if (($count -lt 1) -or ($next -eq "") -or ($next -eq $cursor)) {
$("Invalid pagination cursor.")
exit
}
$cursor = $next
$pageSuffix.SetString("&starting_after=")
$pageSuffix.Append($cursor)
}
}
if ($expectedAmount -eq "") {
$("The selected payout was not in this date range.")
exit
}
$totalNet = 0
# This portable example uses int for arithmetic. Reject an out-of-range entry
# or sum before adding. A larger ledger can sum the exact strings using decimal arithmetic.
$number = New-Object Chilkat.StringBuilder
$pageSuffixTxn = New-Object Chilkat.StringBuilder
$moreTxn = $true
$cursorTxn = ""
while (($moreTxn -eq $true)) {
# curl -X GET "https://api.stripe.com/v1/balance_transactions?payout={selectedPayout}&limit=100" \
# -u "$STRIPE_API_KEY:" \
# -H "Stripe-Version: 2026-10-28.endive"
$cmd.SetString("curl -X GET `"https://api.stripe.com/v1/balance_transactions?payout=@PAYOUT@&limit=100@CURSOR@`"")
$cmd.Append(" -u `"@KEY@:`"")
$cmd.Append(" -H `"Stripe-Version: 2026-10-28.endive`"")
$replaced = $cmd.Replace("@CURSOR@",$pageSuffixTxn.GetAsString())
$replaced = $cmd.Replace("@PAYOUT@",$selectedPayout)
$replaced = $cmd.Replace("@KEY@",$apiKey)
$success = $curl.DoYourThing($cmd.GetAsString())
if ($success -ne $true) {
$("No HTTP response. Chilkat failure code: " + $curl.FailReason)
exit
}
$success = $curl.GetResponseJson($json)
if (($curl.StatusCode -ne 200) -or ($success -ne $true)) {
$("Stripe HTTP " + $curl.StatusCode + " Request-Id: " + $curl.GetResponseHeaderField("Request-Id"))
if ($success -eq $true) {
$($json.StringOf("error.message"))
}
exit
}
$iTxn = 0
$countTxn = $json.SizeOfArray("data")
while (($iTxn -lt $countTxn)) {
$json.I = $iTxn
$($json.StringOf("data[i].id") + " " + $json.StringOf("data[i].net"))
if ($json.StringOf("data[i].currency") -ne $currency) {
$("Currency mismatch.")
exit
}
# Exclude the bank withdrawal itself if it appears in this batch.
if ($json.StringOf("data[i].source") -ne $selectedPayout) {
$netText = $json.StringOf("data[i].net")
$entryNet = $json.IntOf("data[i].net")
$number.IntValue = $entryNet
if ($number.GetAsString() -ne $netText) {
$("Entry exceeds the supported int range: " + $netText)
exit
}
if ($entryNet -gt 0) {
if ($totalNet -gt (2147483647 - $entryNet)) {
$("Total exceeds the supported int range.")
exit
}
}
if ($entryNet -lt 0) {
if ($totalNet -lt ((0 - 2147483647) - ($entryNet + 1))) {
$("Total exceeds the supported int range.")
exit
}
}
$totalNet = $totalNet + $entryNet
}
$iTxn = $iTxn + 1
}
$moreTxn = $json.BoolOf("has_more")
if ($moreTxn -eq $true) {
$nextTxn = $json.StringOf("data[i].id")
if (($countTxn -lt 1) -or ($nextTxn -eq "") -or ($nextTxn -eq $cursorTxn)) {
$("Invalid pagination cursor.")
exit
}
$cursorTxn = $nextTxn
$pageSuffixTxn.SetString("&starting_after=")
$pageSuffixTxn.Append($cursorTxn)
}
}
$number.IntValue = $totalNet
$("Settlement net: " + $totalNet + " Bank payout: " + $expectedAmount + " " + $currency)
if ($number.GetAsString() -eq $expectedAmount) {
$("Payout reconciled.")
}
else {
$("Investigate the difference.")
}