(PowerBuilder) GeoOp - Create Client

Creates a new client.

Chilkat ActiveX Downloads ActiveX for 32-bit and 64-bit Windows

integer li_rc
oleobject loo_JsonToken
integer li_Success
oleobject loo_Oauth2
oleobject loo_Rest
integer li_BAutoReconnect
oleobject loo_JsonClient
string ls_ResponseBody
oleobject loo_Json

// This example assumes the Chilkat API to have been previously unlocked.
// See Global Unlock Sample for sample code.

// This example also assumes an OAuth2 access token was previously fetched.
// and saved in a JSON file.  

// First get our previously obtained access token.
// {"access_token":"e6dqdG....mzjpT04w==","token_type":"Bearer","expires_in":2592000,"owner_id":999236}
loo_JsonToken = create oleobject
// Use "Chilkat_9_5_0.JsonObject" for versions of Chilkat < 10.0.0
li_rc = loo_JsonToken.ConnectToNewObject("Chilkat.JsonObject")
if li_rc < 0 then
    destroy loo_JsonToken
    MessageBox("Error","Connecting to COM object failed")
    return
end if
li_Success = loo_JsonToken.LoadFile("qa_data/tokens/geoop.json")

// This example assumes we previously obtained an access token
loo_Oauth2 = create oleobject
// Use "Chilkat_9_5_0.OAuth2" for versions of Chilkat < 10.0.0
li_rc = loo_Oauth2.ConnectToNewObject("Chilkat.OAuth2")

loo_Oauth2.AccessToken = loo_JsonToken.StringOf("access_token")

loo_Rest = create oleobject
// Use "Chilkat_9_5_0.Rest" for versions of Chilkat < 10.0.0
li_rc = loo_Rest.ConnectToNewObject("Chilkat.Rest")

// Connect to GeoOp..
// Note: The same REST object, once connected, can be used for many requests.
// The bAutoReconnect argument allows it to automatically reconnect as required for any subsequent request.

li_BAutoReconnect = 1
li_Success = loo_Rest.Connect("api.geoop.com",443,1,li_BAutoReconnect)
if li_Success <> 1 then
    Write-Debug loo_Rest.LastErrorText
    destroy loo_JsonToken
    destroy loo_Oauth2
    destroy loo_Rest
    return
end if

// Provide the authentication credentials (i.e. the access token)
loo_Rest.SetAuthOAuth2(loo_Oauth2)

// Set the X-Version header.
loo_Rest.AddHeader("X-Version","1.0")

// To create a new client, we can build and send the following JSON:
// 	{
// 	  "clients": [
// 	    {
// 	      "firstName": "Joe",
// 	      "lastName": "Miller",
// 	      "companyName": "Miller Bakery",
// 	      "businessType": "Licensed Bakery",
// 	      "account": {
// 	        "id": 39409
// 	      },
// 	      "address": {
// 	        "line1": "1832 Pennsylvania Avenue NW",
// 	        "city": "Washington",
// 	        "postcode": "20006",
// 	      }
// 	    }
// 	}

loo_JsonClient = create oleobject
// Use "Chilkat_9_5_0.JsonObject" for versions of Chilkat < 10.0.0
li_rc = loo_JsonClient.ConnectToNewObject("Chilkat.JsonObject")

loo_JsonClient.UpdateInt("clients[0].account.id",39409)
loo_JsonClient.UpdateString("clients[0].firstName","Joe")
loo_JsonClient.UpdateString("clients[0].lastName","Miller")
loo_JsonClient.UpdateString("clients[0].companyName","Miller Bakery")
loo_JsonClient.UpdateString("clients[0].businessType","Licensed Bakery")
loo_JsonClient.UpdateString("clients[0].address.line1","1832 Pennsylvania Avenue NW")
loo_JsonClient.UpdateString("clients[0].address.city","Washington")
loo_JsonClient.UpdateString("clients[0].address.postcode","20006")

// Examine the JSON we're about to send...
loo_JsonClient.EmitCompact = 0
Write-Debug loo_JsonClient.Emit()

loo_Rest.AddHeader("Content-Type","application/json")

loo_JsonClient.EmitCompact = 1
ls_ResponseBody = loo_Rest.FullRequestString("POST","/clients",loo_JsonClient.Emit())
if loo_Rest.LastMethodSuccess <> 1 then
    Write-Debug loo_Rest.LastErrorText
    destroy loo_JsonToken
    destroy loo_Oauth2
    destroy loo_Rest
    destroy loo_JsonClient
    return
end if

loo_Json = create oleobject
// Use "Chilkat_9_5_0.JsonObject" for versions of Chilkat < 10.0.0
li_rc = loo_Json.ConnectToNewObject("Chilkat.JsonObject")

loo_Json.EmitCompact = 0

// If the response status code did not indicate success, then see what happened..
if loo_Rest.ResponseStatusCode <> 200 then
    Write-Debug "Request Header: "
    Write-Debug loo_Rest.LastRequestHeader
    Write-Debug "----"
    Write-Debug "Response StatusCode = " + string(loo_Rest.ResponseStatusCode)
    Write-Debug "Response StatusLine: " + loo_Rest.ResponseStatusText
    Write-Debug "Response Header:"
    Write-Debug loo_Rest.ResponseHeader
    loo_Json.Load(ls_ResponseBody)
    Write-Debug loo_Json.Emit()
    destroy loo_JsonToken
    destroy loo_Oauth2
    destroy loo_Rest
    destroy loo_JsonClient
    destroy loo_Json
    return
end if

loo_Json.Load(ls_ResponseBody)
// Show the full JSON response..
Write-Debug loo_Json.Emit()

// The success JSON looks like this:

// 	{
// 	  "result": "success",
// 	  "clients": [
// 	    {
// 	      "id": 9571218,
// 	      "firstName": "Joe",
// 	      "lastName": "Miller",
// 	      "companyName": "Miller Bakery",
// 	      "businessType": "Licensed Bakery",
// 	      "leadSource": "",
// 	      "emailAddress": null,
// 	      "phoneNumber": null,
// 	      "mobileNumber": null,
// 	      "faxNumber": null,
// 	      "notes": "",
// 	      "deleted": false,
// 	      "hasRecentJobs": false,
// 	      "created": "2016-10-31T13:02:07+00:00",
// 	      "modified": "2016-10-31T13:02:07+00:00",
// 	      "billingClient": null,
// 	      "account": {
// 	        "id": 39409
// 	      },
// 	      "address": {
// 	        "line1": "1832 Pennsylvania Avenue NW",
// 	        "line2": "",
// 	        "city": "Washington",
// 	        "postcode": "20006",
// 	        "latitude": 0,
// 	        "longitude": 0
// 	      },
// 	      "mailingAddress": {
// 	        "line1": "",
// 	        "line2": "",
// 	        "city": ""
// 	      }
// 	    }
// 	  ],
// 	  "metadata": {
// 	    "receivedItemsCount": 1,
// 	    "validItems": [
// 	      0
// 	    ],
// 	    "invalidItems": [
// 	    ]
// 	  }
// 	}
// 
// 


destroy loo_JsonToken
destroy loo_Oauth2
destroy loo_Rest
destroy loo_JsonClient
destroy loo_Json