(PHP ActiveX) Set .pfx/.p12 Safe Bag Attributes

Demonstrates how to set safebag attributes in a .pfx/.p12. This example creates a .pfx from a .pem containing a private key and certificates, but also sets PFX safebag attributes before writing the .pfx.

Chilkat ActiveX Downloads ActiveX for 32-bit and 64-bit Windows Note: The php_com_dotnet.dll may need to be enabled inside of php.ini.

<?php

// We have a PEM containing one private key, and two certificates:
// The private key is an ECDSA private key.
// The private key is associated with the 1st certificate.
// The 2nd certificate is the issuer of the 1st certificate.

// -----BEGIN PRIVATE KEY-----
// ME0CAQAwEwYHKoZIzj0CAQYIKoZIzj0DAQcEMzAxAgEBBCDgAn4Dal+0iEhIsYBk
// 6SdSR344vyj0suhOIxsjmM19s6AKBggqhkjOPQMBBw==
// -----END PRIVATE KEY-----
// -----BEGIN CERTIFICATE-----
// MIIBXzCCAQSgAwIBAgIUGp2obfF61BG7QTsqpyT+VvxxJC0wCgYIKoZIzj0EAwIw
// DTELMAkGA1UEAwwCQ0EwHhcNMjAwMzI5MTU1MTEwWhcNMzAwMzI3MTU1MTEwWjAN
// MQswCQYDVQQDDAJFRTBZMBMGByqGSM49AgEGCCqGSM49AwEHA0IABEil+DhBUss8
// kMCjEWvZHA+jdy1mQ76a2HFd+5p+AcFGQxNeG8/HXZax7FFzcrczWrli25R8P8j1
// cqhwPY4HtwujQjBAMB0GA1UdDgQWBBTenwm6x4A4W5BzZ2OckKA2IFtPSTAfBgNV
// HSMEGDAWgBTx1U/gWiRhAASl6FV04DxP3XmcazAKBggqhkjOPQQDAgNJADBGAiEA
// rkqbz5t1M/CjqXSKE5ebBLQ3npF+q7GRC8C2ovDi/xoCIQDGve7OP/ppIDcCNonr
// +WSRf5M/6Wvw1lnEsAXf3nLTeQ==
// -----END CERTIFICATE-----
// -----BEGIN CERTIFICATE-----
// MIIBcDCCARWgAwIBAgIUAnQiKKy/PdLnH0A6vYKBq21w1JAwCgYIKoZIzj0EAwIw
// DTELMAkGA1UEAwwCQ0EwHhcNMjAwMzI5MTU1MTEwWhcNMzAwMzI3MTU1MTEwWjAN
// MQswCQYDVQQDDAJDQTBZMBMGByqGSM49AgEGCCqGSM49AwEHA0IABPB6yVvqt8cL
// EneRtnjoi87H0ATi+JP1w2qkz4GLOaPtFxAnV0LdQCuN91SGbAlKrSkhFyWWimjh
// Rqe9+b/1WCijUzBRMB0GA1UdDgQWBBTx1U/gWiRhAASl6FV04DxP3XmcazAfBgNV
// HSMEGDAWgBTx1U/gWiRhAASl6FV04DxP3XmcazAPBgNVHRMBAf8EBTADAQH/MAoG
// CCqGSM49BAMCA0kAMEYCIQCcIfssfrOruVYvqhxbLGeyc5ppEX53zUU35wIE2t7C
// fAIhAKhOTEvN+pdEn+cNwW3AEi7D08ZUQx3P80i4EnFPs0OQ
// -----END CERTIFICATE-----

// For versions of Chilkat < 10.0.0, use new COM('Chilkat_9_5_0.Chilkat.Pfx')
$pfx = new COM("Chilkat.Pfx");
// For versions of Chilkat < 10.0.0, use new COM('Chilkat_9_5_0.Chilkat.StringBuilder')
$sbPem = new COM("Chilkat.StringBuilder");
$success = $sbPem->LoadFile('qa_data/pfx/test_ecdsa.pem','utf-8');
if ($success == 0) {
    print 'Failed to load the PEM file.' . "\n";
    exit;
}

// The PEM in this example is unencrypted.  There is no password.
$password = '';
$success = $pfx->LoadPem($sbPem->getAsString(),$password);
if ($success == 0) {
    print $pfx->LastErrorText . "\n";
    exit;
}

// Let's add some safebag attributes for the private key...
$forPrivateKey = 1;
$keyIdx = 0;
$success = $pfx->SetSafeBagAttr($forPrivateKey,$keyIdx,'localKeyId','16777216','decimal');
if ($success == 0) {
    print $pfx->LastErrorText . "\n";
    exit;
}

$success = $pfx->SetSafeBagAttr($forPrivateKey,$keyIdx,'keyContainerName','{B99EB9E7-6AF7-42AF-A43A-D4B2225B7605}','ascii');
if ($success == 0) {
    print $pfx->LastErrorText . "\n";
    exit;
}

$success = $pfx->SetSafeBagAttr($forPrivateKey,$keyIdx,'storageProvider','Microsoft Software Key Storage Provider','ascii');
if ($success == 0) {
    print $pfx->LastErrorText . "\n";
    exit;
}

// Add the localKeyId safebag attribute to the 1st certificate.
$forPrivateKey = 0;
$certIdx = 0;
$success = $pfx->SetSafeBagAttr($forPrivateKey,$certIdx,'localKeyId','16777216','decimal');
if ($success == 0) {
    print $pfx->LastErrorText . "\n";
    exit;
}

// Write the pfx.
$success = $pfx->ToFile('secret','qa_output/ee.pfx');
if ($success == 0) {
    print $pfx->LastErrorText . "\n";
    exit;
}

// Let's load the .pfx we just wrote to see if the safebag attributes exist.
// For versions of Chilkat < 10.0.0, use new COM('Chilkat_9_5_0.Chilkat.Pfx')
$pfx2 = new COM("Chilkat.Pfx");
$success = $pfx2->LoadPfxFile('qa_output/ee.pfx','secret');
if ($success == 0) {
    print $pfx2->LastErrorText . "\n";
    exit;
}

// After calling LoadPfxFile, the LastJsonData shows what's in the loaded PFX.
// json is a Chilkat.JsonObject
$json = $pfx2->LastJsonData();
$json->EmitCompact = 0;
print $json->emit() . "\n";

// The LastJsonData shows what's in the PFX just loaded:

// {
//   "authenticatedSafe": {
//     "contentInfo": [
//       {
//         "type": "Data",
//         "safeBag": [
//           {
//             "type": "pkcs8ShroudedKeyBag",
//             "attrs": {
//               "keyContainerName": "{B99EB9E7-6AF7-42AF-A43A-D4B2225B7605}",
//               "msStorageProvider": "Microsoft Software Key Storage Provider",
//               "localKeyId": "16777216"
//             }
//           }
//         ]
//       },
//       {
//         "type": "EncryptedData",
//         "safeBag": [
//           {
//             "type": "certBag",
//             "attrs": {
//               "localKeyId": "16777216"
//             },
//             "subject": "EE",
//             "serialNumber": "1a9da86df17ad411bb413b2aa724fe56fc71242d"
//           },
//           {
//             "type": "certBag",
//             "subject": "CA",
//             "serialNumber": "02742228acbf3dd2e71f403abd8281ab6d70d490"
//           }
//         ]
//       }
//     ]
//   }
// }

?>