(PHP ActiveX) DynamoDB - Query

The Query operation finds items based on primary key values. You can query any table or secondary index that has a composite primary key (a partition key and a sort key).

For more information, see https://docs.aws.amazon.com/amazondynamodb/latest/APIReference/API_Query.html

Chilkat ActiveX Downloads ActiveX for 32-bit and 64-bit Windows Note: The php_com_dotnet.dll may need to be enabled inside of php.ini.

<?php

// For versions of Chilkat < 10.0.0, use new COM('Chilkat_9_5_0.Chilkat.Rest')
$rest = new COM("Chilkat.Rest");

// Implements the following CURL command:

// curl -X POST https://dynamodb.us-west-2.amazonaws.com/ \
//   -H "Accept-Encoding: identity" \
//   -H "Content-Type: application/x-amz-json-1.0" \
//   -H "Authorization: AWS4-HMAC-SHA256 Credential=<Credential>, SignedHeaders=<Headers>, Signature=<Signature>" \
//   -H "X-Amz-Date: <Date>" \
//   -H "X-Amz-Target: DynamoDB_20120810.Query" \
//   -d '{
//     "TableName": "Reply",
//     "IndexName": "PostedBy-Index",
//     "Limit": 3,
//     "ConsistentRead": true,
//     "ProjectionExpression": "Id, PostedBy, ReplyDateTime",
//     "KeyConditionExpression": "Id = :v1 AND PostedBy BETWEEN :v2a AND :v2b",
//     "ExpressionAttributeValues": {
//         ":v1": {"S": "Amazon DynamoDB#DynamoDB Thread 1"},
//         ":v2a": {"S": "User A"},
//         ":v2b": {"S": "User C"}
//     },
//     "ReturnConsumedCapacity": "TOTAL"
// }'

// Use the following online tool to generate REST code from a CURL command
// Convert a cURL Command to REST Source Code

// For versions of Chilkat < 10.0.0, use new COM('Chilkat_9_5_0.Chilkat.AuthAws')
$authAws = new COM("Chilkat.AuthAws");
$authAws->AccessKey = 'AWS_ACCESS_KEY';
$authAws->SecretKey = 'AWS_SECRET_KEY';
// Don't forget to change the region to your particular region. (Also make the same change in the call to Connect below.)
$authAws->Region = 'us-west-2';
$authAws->ServiceName = 'dynamodb';
// SetAuthAws causes Chilkat to automatically add the following headers: Authorization, X-Amz-Date
$rest->SetAuthAws($authAws);

// URL: https://dynamodb.us-west-2.amazonaws.com/
$bTls = 1;
$port = 443;
$bAutoReconnect = 1;
$success = $rest->Connect('dynamodb.us-west-2.amazonaws.com',$port,$bTls,$bAutoReconnect);
if ($success != 1) {
    print 'ConnectFailReason: ' . $rest->ConnectFailReason . "\n";
    print $rest->LastErrorText . "\n";
    exit;
}

// Note: The above code does not need to be repeatedly called for each REST request.
// The rest object can be setup once, and then many requests can be sent.  Chilkat will automatically
// reconnect within a FullRequest* method as needed.  It is only the very first connection that is explicitly
// made via the Connect method.

// Use this online tool to generate code from sample JSON:
// Generate Code to Create JSON

// The following JSON is sent in the request body.

// {
//   "TableName": "Reply",
//   "IndexName": "PostedBy-Index",
//   "Limit": 3,
//   "ConsistentRead": true,
//   "ProjectionExpression": "Id, PostedBy, ReplyDateTime",
//   "KeyConditionExpression": "Id = :v1 AND PostedBy BETWEEN :v2a AND :v2b",
//   "ExpressionAttributeValues": {
//     ":v1": {
//       "S": "Amazon DynamoDB#DynamoDB Thread 1"
//     },
//     ":v2a": {
//       "S": "User A"
//     },
//     ":v2b": {
//       "S": "User C"
//     }
//   },
//   "ReturnConsumedCapacity": "TOTAL"
// }

// For versions of Chilkat < 10.0.0, use new COM('Chilkat_9_5_0.Chilkat.JsonObject')
$json = new COM("Chilkat.JsonObject");
$json->UpdateString('TableName','Reply');
$json->UpdateString('IndexName','PostedBy-Index');
$json->UpdateInt('Limit',3);
$json->UpdateBool('ConsistentRead',1);
$json->UpdateString('ProjectionExpression','Id, PostedBy, ReplyDateTime');
$json->UpdateString('KeyConditionExpression','Id = :v1 AND PostedBy BETWEEN :v2a AND :v2b');
$json->UpdateString('ExpressionAttributeValues.:v1.S','Amazon DynamoDB#DynamoDB Thread 1');
$json->UpdateString('ExpressionAttributeValues.:v2a.S','User A');
$json->UpdateString('ExpressionAttributeValues.:v2b.S','User C');
$json->UpdateString('ReturnConsumedCapacity','TOTAL');

$rest->AddHeader('Content-Type','application/x-amz-json-1.0');
$rest->AddHeader('X-Amz-Target','DynamoDB_20120810.Query');
$rest->AddHeader('Accept-Encoding','identity');

// For versions of Chilkat < 10.0.0, use new COM('Chilkat_9_5_0.Chilkat.StringBuilder')
$sbRequestBody = new COM("Chilkat.StringBuilder");
$json->EmitSb($sbRequestBody);
// For versions of Chilkat < 10.0.0, use new COM('Chilkat_9_5_0.Chilkat.StringBuilder')
$sbResponseBody = new COM("Chilkat.StringBuilder");
$success = $rest->FullRequestSb('POST','/',$sbRequestBody,$sbResponseBody);
if ($success != 1) {
    print $rest->LastErrorText . "\n";
    exit;
}

$respStatusCode = $rest->ResponseStatusCode;
print 'response status code = ' . $respStatusCode . "\n";
if ($respStatusCode >= 400) {
    print 'Response Status Code = ' . $respStatusCode . "\n";
    print 'Response Header:' . "\n";
    print $rest->ResponseHeader . "\n";
    print 'Response Body:' . "\n";
    print $sbResponseBody->getAsString() . "\n";
    exit;
}

// For versions of Chilkat < 10.0.0, use new COM('Chilkat_9_5_0.Chilkat.JsonObject')
$jsonResponse = new COM("Chilkat.JsonObject");
$jsonResponse->LoadSb($sbResponseBody);

$jsonResponse->EmitCompact = 0;
print $jsonResponse->emit() . "\n";

// Sample JSON response:
// (Sample code for parsing the JSON response is shown below)

// {
//   "ConsumedCapacity": {
//     "CapacityUnits": 1,
//     "TableName": "Reply"
//   },
//   "Count": 2,
//   "Items": [
//     {
//       "ReplyDateTime": {
//         "S": "2015-02-18T20:27:36.165Z"
//       },
//       "PostedBy": {
//         "S": "User A"
//       },
//       "Id": {
//         "S": "Amazon DynamoDB#DynamoDB Thread 1"
//       }
//     },
//     {
//       "ReplyDateTime": {
//         "S": "2015-02-25T20:27:36.165Z"
//       },
//       "PostedBy": {
//         "S": "User B"
//       },
//       "Id": {
//         "S": "Amazon DynamoDB#DynamoDB Thread 1"
//       }
//     }
//   ],
//   "ScannedCount": 2
// }

// Sample code for parsing the JSON response...
// Use the following online tool to generate parsing code from sample JSON:
// Generate Parsing Code from JSON

$ConsumedCapacityCapacityUnits = $jsonResponse->IntOf('ConsumedCapacity.CapacityUnits');
$ConsumedCapacityTableName = $jsonResponse->stringOf('ConsumedCapacity.TableName');
$Count = $jsonResponse->IntOf('Count');
$ScannedCount = $jsonResponse->IntOf('ScannedCount');
$i = 0;
$count_i = $jsonResponse->SizeOfArray('Items');
while ($i < $count_i) {
    $jsonResponse->I = $i;
    $ReplyDateTimeS = $jsonResponse->stringOf('Items[i].ReplyDateTime.S');
    $PostedByS = $jsonResponse->stringOf('Items[i].PostedBy.S');
    $IdS = $jsonResponse->stringOf('Items[i].Id.S');
    $i = $i + 1;
}


?>