(Chilkat2-Python) Trello OAuth1 Authorization

Demonstrates OAuth1 authentication for Trello.

Chilkat2 Python Downloads install with pip pip3 install chilkat2 or download... Python Module for Windows, Linux, Alpine Linux, MacOS, Solaris

import sys
import chilkat2

# This example requires the Chilkat API to have been previously unlocked.
# See Global Unlock Sample for sample code.

consumerKey = "TRELLO_CONSUMER_KEY"
consumerSecret = "TRELLO_CONSUMER_SECRET"

requestTokenUrl = "https://trello.com/1/OAuthGetRequestToken"
authorizeUrl = "https://trello.com/1/OAuthAuthorizeToken"
accessTokenUrl = "https://trello.com/1/OAuthGetAccessToken"

# The port number is picked at random. It's some unused port that won't likely conflict with anything else..
callbackUrl = "http://localhost:3017/"
callbackLocalPort = 3017

# The 1st step in 3-legged OAuth1.0a is to send a POST to the request token URL to obtain an OAuth Request Token
http = chilkat2.Http()

http.OAuth1 = True
http.OAuthConsumerKey = consumerKey
http.OAuthConsumerSecret = consumerSecret
http.OAuthCallback = callbackUrl

req = chilkat2.HttpRequest()
# resp is a CkHttpResponse
resp = http.PostUrlEncoded(requestTokenUrl,req)
if (http.LastMethodSuccess != True):
    print(http.LastErrorText)
    sys.exit()

# If successful, the resp.BodyStr contains something like this:  
# oauth_token=c173ff088a09a67389a42b1ee22366a4&oauth_token_secret=717e6015c6749fe050a923516e739dbb&oauth_callback_confirmed=true
print(resp.BodyStr)

hashTab = chilkat2.Hashtable()
hashTab.AddQueryParams(resp.BodyStr)

requestToken = hashTab.LookupStr("oauth_token")
requestTokenSecret = hashTab.LookupStr("oauth_token_secret")
http.OAuthTokenSecret = requestTokenSecret

print("oauth_token = " + requestToken)
print("oauth_token_secret = " + requestTokenSecret)

# ---------------------------------------------------------------------------
# The next step is to form a URL to send to the authorizeUrl
# This is an HTTP GET that we load into a popup browser.
sbUrlForBrowser = chilkat2.StringBuilder()
sbUrlForBrowser.Append(authorizeUrl)
sbUrlForBrowser.Append("?oauth_token=")
sbUrlForBrowser.Append(requestToken)
sbUrlForBrowser.Append("&scope=read,write,account")

url = sbUrlForBrowser.GetAsString()

print("url = " + url)

# When the urlForBrowser is loaded into a browser, the response from Trello will redirect back to localhost:3017
# We'll need to start a socket that is listening on port 3017 for the callback from the browser.
listenSock = chilkat2.Socket()

backLog = 5
success = listenSock.BindAndListen(callbackLocalPort,backLog)
if (success != True):
    print(listenSock.LastErrorText)
    sys.exit()

# Wait for the browser's connection in a background thread.
# (We'll send load the URL into the browser following this..)
# Wait a max of 60 seconds before giving up.
maxWaitMs = 60000
# task is a CkTask
task = listenSock.AcceptNextConnectionAsync(maxWaitMs)
task.Run()

#  At this point, your application should load the URL in a browser.
#  For example,
# in C#: System.Diagnostics.Process.Start(url);
# in Java: Desktop.getDesktop().browse(new URI(urlForBrowser));
# in VBScript: Set wsh=WScript.CreateObject("WScript.Shell")
#               wsh.Run urlForBrowser
# in Xojo: ShowURL(url)  (see http://docs.xojo.com/index.php/ShowURL)
# in Dataflex: Runprogram Background "c:\Program Files\Internet Explorer\iexplore.exe" sUrl        
#  The Trello account owner would interactively accept or deny the authorization request.

#  Add the code to load the url in a web browser here...
#  Add the code to load the url in a web browser here...
#  Add the code to load the url in a web browser here...
# System.Diagnostics.Process.Start(urlForBrowser);

# Wait for the listenSock's task to complete.
success = task.Wait(maxWaitMs)
if (not success or (task.StatusInt != 7) or (task.TaskSuccess != True)):
    if (not success):
        # The task.LastErrorText applies to the Wait method call.
        print(task.LastErrorText)
    else:
        # The ResultErrorText applies to the underlying task method call (i.e. the AcceptNextConnection)
        print(task.Status)
        print(task.ResultErrorText)

    sys.exit()

# If we get to this point, the connection from the browser arrived and was accepted.

# We no longer need the listen socket...
# Stop listening on port 3017.
listenSock.Close(10)

# First get the connected socket.
sock = chilkat2.Socket()
sock.LoadTaskResult(task)

# Read the start line of the request..
startLine = sock.ReceiveUntilMatch("\r\n")
if (sock.LastMethodSuccess != True):
    print(sock.LastErrorText)
    sys.exit()

# Read the request header.
requestHeader = sock.ReceiveUntilMatch("\r\n\r\n")
if (sock.LastMethodSuccess != True):
    print(sock.LastErrorText)
    sys.exit()

# The browser SHOULD be sending us a GET request, and therefore there is no body to the request.
# Once the request header is received, we have all of it.
# We can now send our HTTP response.
sbResponseHtml = chilkat2.StringBuilder()
sbResponseHtml.Append("<html><body><p>Chilkat thanks you!</b></body</html>")

sbResponse = chilkat2.StringBuilder()
sbResponse.Append("HTTP/1.1 200 OK\r\n")
sbResponse.Append("Content-Length: ")
sbResponse.AppendInt(sbResponseHtml.Length)
sbResponse.Append("\r\n")
sbResponse.Append("Content-Type: text/html\r\n")
sbResponse.Append("\r\n")
sbResponse.AppendSb(sbResponseHtml)

sock.SendString(sbResponse.GetAsString())
sock.Close(50)

# The information we need is in the startLine.
# For example, the startLine will look something like this:
#  GET /?oauth_token=c173ff088a09a67389b42b1ee32366a4&oauth_verifier=c65bc8eed882e04bb94023bb12c0dbef HTTP/1.1
sbStartLine = chilkat2.StringBuilder()
sbStartLine.Append(startLine)
numReplacements = sbStartLine.Replace("GET /?","")
numReplacements = sbStartLine.Replace(" HTTP/1.1","")
sbStartLine.Trim()

# oauth_token=c173ff088a09a67389b42b1ee32366a4&oauth_verifier=c65bc8eed882e04bb94023bb12c0dbef
print("startline: " + sbStartLine.GetAsString())

hashTab.Clear()
hashTab.AddQueryParams(sbStartLine.GetAsString())

requestToken = hashTab.LookupStr("oauth_token")
authVerifier = hashTab.LookupStr("oauth_verifier")

# ------------------------------------------------------------------------------
# Finally , we must exchange the OAuth Request Token for an OAuth Access Token.

http.OAuthToken = requestToken
http.OAuthVerifier = authVerifier
# resp is a CkHttpResponse
resp = http.PostUrlEncoded(accessTokenUrl,req)
if (http.LastMethodSuccess != True):
    print(http.LastErrorText)
    sys.exit()

# Make sure a successful response was received.
if (resp.StatusCode != 200):
    print(resp.StatusLine)
    print(resp.Header)
    print(resp.BodyStr)
    sys.exit()

# If successful, the resp.BodyStr contains something like this:
# oauth_token=4618e19f5101b7199f75aA9e678d1585576ad84fb89fa40c85c4da13589010d5&oauth_token_secret=64a997b26ea1f47105eca36ce1a5d22e
print("response BodyStr = " + resp.BodyStr)

hashTab.Clear()
hashTab.AddQueryParams(resp.BodyStr)

accessToken = hashTab.LookupStr("oauth_token")
accessTokenSecret = hashTab.LookupStr("oauth_token_secret")

# The access token + secret is what should be saved and used for
# subsequent REST API calls.
print("Access Token = " + accessToken)
print("Access Token Secret = " + accessTokenSecret)

# Save the access token for subsequent REST API calls.
json = chilkat2.JsonObject()
json.AppendString("oauth_token",accessToken)
json.AppendString("oauth_token_secret",accessTokenSecret)

fac = chilkat2.FileAccess()
fac.WriteEntireTextFile("qa_data/tokens/trello.json",json.Emit(),"utf-8",False)

print("Success.")