Classic ASP

DocuSign Add Documents to a Draft Envelope

See more DocuSign Examples

Demonstrates how to add one or more additional documents to a DocuSign draft envelope. Classic ASP

<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
</head>
<body>
<%
success = 0

'  This example assumes the Chilkat API to have been previously unlocked.
'  See Global Unlock Sample for sample code.

set http = Server.CreateObject("Chilkat.Http")

'  Load a previously obtained OAuth2 access token.
set jsonToken = Server.CreateObject("Chilkat.JsonObject")
success = jsonToken.LoadFile("qa_data/tokens/docusign.json")
If (success = 0) Then
    Response.Write "<pre>" & Server.HTMLEncode( jsonToken.LastErrorText) & "</pre>"
    Response.End
End If

'  Adds the "Authorization: Bearer eyJ0eXAi.....UE8Kl_V8KroQ" header.
http.AuthToken = jsonToken.StringOf("access_token")

'  Send the following request.
'  Make sure to use your own account ID (obtained from Get Docusign User Account Information)

'  PUT https://demo.docusign.net/restapi/v2.1/accounts/<account ID>/envelopes/<envelope ID>/documents HTTP/1.1
'  Expect: 100-continue
'  Accept: application/json
'  Cache-Control: no-cache
'  Authorization: Bearer eyJ0eX...
'  Content-Length: ...
'  Content-Type: application/json
'  
'  {
'  	"documents": [
'  		{
'  		"documentId": "1",
'  		"name": "hello.pdf",
'  		"pages": "1",
'  		"documentBase64": "<insert base64 content here>"
'  		},
'  		{
'  		"documentId": "2",
'  		"name": "hello2.pdf",
'  		"pages": "1",
'  		"documentBase64": "<insert base64 content here>"
'  		}
'  	]
'  }

set bd1 = Server.CreateObject("Chilkat.BinData")
success = bd1.LoadFile("qa_data/pdf/hello.pdf")
set bd2 = Server.CreateObject("Chilkat.BinData")
success = bd2.LoadFile("qa_data/pdf/hello2.pdf")

set json = Server.CreateObject("Chilkat.JsonObject")
i = 0
json.I = i
success = json.UpdateString("documents[i].documentId","1")
success = json.UpdateString("documents[i].name","hello.pdf")
success = json.UpdateString("documents[i].pages","1")
success = json.UpdateString("documents[i].documentBase64",bd1.GetEncoded("base64"))
i = i + 1
json.I = i
success = json.UpdateString("documents[i].documentId","2")
success = json.UpdateString("documents[i].name","hello2.pdf")
success = json.UpdateString("documents[i].pages","1")
success = json.UpdateString("documents[i].documentBase64",bd2.GetEncoded("base64"))

set sbJson = Server.CreateObject("Chilkat.StringBuilder")
json.EmitCompact = 0
success = json.EmitSb(sbJson)

http.SetRequestHeader "Expect","100-continue"
http.SetRequestHeader "Cache-Control","no-cache"
http.SetRequestHeader "Accept","application/json"

'  Use your own account ID here.
success = http.SetUrlVar("accountId","7f3f65ed-5e87-418d-94c1-92499ddc8252")
'  Use the envelope ID returned by DocuSign when creating the draft envelope).
success = http.SetUrlVar("envelopeId","e01f2043-3850-4fcb-afd1-b1726216e099")

url = "https://demo.docusign.net/restapi/v2.1/accounts/{$accountId}/envelopes/{$envelopeId}/documents"
set resp = Server.CreateObject("Chilkat.HttpResponse")
success = http.HttpSb("PUT",url,sbJson,"utf-8","application/json",resp)
If (success = 0) Then
    Response.Write "<pre>" & Server.HTMLEncode( http.LastErrorText) & "</pre>"
    Response.End
End If

set jResp = Server.CreateObject("Chilkat.JsonObject")
success = jResp.Load(resp.BodyStr)
jResp.EmitCompact = 0

Response.Write "<pre>" & Server.HTMLEncode( "Response Body:") & "</pre>"
Response.Write "<pre>" & Server.HTMLEncode( jResp.Emit()) & "</pre>"

'  If you get a 401 response status code, it's likely you need to refresh the DocuSign OAuth2 token).
respStatusCode = resp.StatusCode
Response.Write "<pre>" & Server.HTMLEncode( "Response Status Code = " & respStatusCode) & "</pre>"
If (respStatusCode >= 400) Then
    Response.Write "<pre>" & Server.HTMLEncode( "Response Header:") & "</pre>"
    Response.Write "<pre>" & Server.HTMLEncode( resp.Header) & "</pre>"
    Response.Write "<pre>" & Server.HTMLEncode( "Failed.") & "</pre>"
    Response.End
End If

'  Sample JSON response:
'  (Sample code for parsing the JSON response is shown below)

'  {
'    "envelopeId": "da9fb811-e6a4-48c0-a9fb-81ed18b989af",
'    "envelopeDocuments": [
'      {
'        "documentId": "1",
'        "documentIdGuid": "38e919fc-0a77-4b0c-9da0-e3530f4e6fc7",
'        "name": "hello.pdf",
'        "type": "content",
'        "uri": "/envelopes/da9fb811-e6a4-48c0-a9fb-81ed18b989af/documents/1",
'        "order": "3",
'        "containsPdfFormFields": "false",
'        "templateRequired": "false",
'        "authoritativeCopy": "false"
'      },
'      {
'        "documentId": "2",
'        "documentIdGuid": "2cbd0fcc-c1ca-4a3a-b8b5-fe252dd89731",
'        "name": "hello2.pdf",
'        "type": "content",
'        "uri": "/envelopes/da9fb811-e6a4-48c0-a9fb-81ed18b989af/documents/2",
'        "order": "4",
'        "containsPdfFormFields": "false",
'        "templateRequired": "false",
'        "authoritativeCopy": "false"
'      }
'    ]
'  }

'  Sample code for parsing the JSON response...
'  Use the following online tool to generate parsing code from sample JSON:
'  Generate Parsing Code from JSON

envelopeId = jResp.StringOf("envelopeId")
i = 0
count_i = jResp.SizeOfArray("envelopeDocuments")
Do While i < count_i
    jResp.I = i
    documentId = jResp.StringOf("envelopeDocuments[i].documentId")
    documentIdGuid = jResp.StringOf("envelopeDocuments[i].documentIdGuid")
    name = jResp.StringOf("envelopeDocuments[i].name")
    v_type = jResp.StringOf("envelopeDocuments[i].type")
    uri = jResp.StringOf("envelopeDocuments[i].uri")
    order = jResp.StringOf("envelopeDocuments[i].order")
    containsPdfFormFields = jResp.StringOf("envelopeDocuments[i].containsPdfFormFields")
    templateRequired = jResp.StringOf("envelopeDocuments[i].templateRequired")
    authoritativeCopy = jResp.StringOf("envelopeDocuments[i].authoritativeCopy")
    i = i + 1
Loop

%>
</body>
</html>