SSH Commands to a Cisco Switch

See more SSH Examples

Demonstrates establishing an SSH session with a Cisco switch (or similar device) and sending commands in a device console session. Each command is sent, and its output is read up to the device's next prompt.

Note: QuickShell allocates a PTY, which is what a network device console expects. The device presents an interactive prompt, and each command's output is read up to the next prompt.

Background: Network devices differ from general-purpose servers in that they expose a menu- or prompt-driven console rather than a Unix shell, so exec requests are usually unavailable and driving the interactive console is the only option. That makes prompt matching the synchronization mechanism, and it is why a PTY is appropriate here despite the general advice to avoid one. Retrieving the received text between commands is essential: a prompt left in the buffer would make the next receive return immediately with the wrong output.

Chilkat C Downloads

Download Chilkat for C

#include <C_CkSsh.h>

void ChilkatSample(void)
    {
    BOOL success;
    HCkSsh ssh;
    int port;
    const char *password;
    int channelNum;
    BOOL caseSensitive;
    const char *cmdOutput;

    success = FALSE;

    //  This example requires the Chilkat API to have been previously unlocked.
    //  See Global Unlock Sample for sample code.

    //  Demonstrates establishing an SSH session with a Cisco switch (or similar device) and sending
    //  commands in a device console session.
    //  
    //  Note: QuickShell allocates a PTY, which is what a network device console expects.  The device
    //  presents an interactive prompt, and each command's output is read up to the next prompt.

    ssh = CkSsh_Create();

    port = 22;
    success = CkSsh_Connect(ssh,"172.16.16.100",port);
    if (success == FALSE) {
        printf("%s\n",CkSsh_lastErrorText(ssh));
        CkSsh_Dispose(ssh);
        return;
    }

    //  Normally you would not hard-code the password in source.  You should instead obtain it
    //  from an interactive prompt, environment variable, or a secrets vault.
    password = "mySshPassword";

    success = CkSsh_AuthenticatePw(ssh,"mySshLogin",password);
    if (success == FALSE) {
        printf("%s\n",CkSsh_lastErrorText(ssh));
        CkSsh_Dispose(ssh);
        return;
    }

    //  Start a shell session.
    channelNum = CkSsh_QuickShell(ssh);
    if (channelNum < 0) {
        printf("%s\n",CkSsh_lastErrorText(ssh));
        CkSsh_Dispose(ssh);
        return;
    }

    //  IMPORTANT: Set a read timeout before receiving until a match.  ReadTimeoutMs defaults to 0,
    //  which means no limit -- without it, this call waits forever if the received data never
    //  contains a match.
    CkSsh_putReadTimeoutMs(ssh,15000);

    caseSensitive = TRUE;

    //  The switch presents a prompt ending in "#".  Reading up to it confirms the session is ready.
    success = CkSsh_ChannelReceiveUntilMatch(ssh,channelNum,"#","utf-8",caseSensitive);
    if (success == FALSE) {
        printf("%s\n",CkSsh_lastErrorText(ssh));
        CkSsh_Dispose(ssh);
        return;
    }

    cmdOutput = CkSsh_getReceivedText(ssh,channelNum,"utf-8");
    if (CkSsh_getLastMethodSuccess(ssh) == FALSE) {
        printf("%s\n",CkSsh_lastErrorText(ssh));
        CkSsh_Dispose(ssh);
        return;
    }

    printf("%s\n",cmdOutput);

    //  Send a command and read its output up to the next prompt.
    success = CkSsh_ChannelSendString(ssh,channelNum,"show clock\n","utf-8");
    if (success == FALSE) {
        printf("%s\n",CkSsh_lastErrorText(ssh));
        CkSsh_Dispose(ssh);
        return;
    }

    success = CkSsh_ChannelReceiveUntilMatch(ssh,channelNum,"#","utf-8",caseSensitive);
    if (success == FALSE) {
        printf("%s\n",CkSsh_lastErrorText(ssh));
        CkSsh_Dispose(ssh);
        return;
    }

    //  Retrieving the text also clears the receive buffer, which matters: if the prompt were left
    //  buffered, the next receive would match it immediately and return the wrong output.
    cmdOutput = CkSsh_getReceivedText(ssh,channelNum,"utf-8");
    if (CkSsh_getLastMethodSuccess(ssh) == FALSE) {
        printf("%s\n",CkSsh_lastErrorText(ssh));
        CkSsh_Dispose(ssh);
        return;
    }

    printf("%s\n",cmdOutput);

    //  Additional commands follow the same send / read-to-prompt / retrieve pattern.
    success = CkSsh_ChannelSendString(ssh,channelNum,"show version\n","utf-8");
    if (success == FALSE) {
        printf("%s\n",CkSsh_lastErrorText(ssh));
        CkSsh_Dispose(ssh);
        return;
    }

    success = CkSsh_ChannelReceiveUntilMatch(ssh,channelNum,"#","utf-8",caseSensitive);
    if (success == FALSE) {
        printf("%s\n",CkSsh_lastErrorText(ssh));
        CkSsh_Dispose(ssh);
        return;
    }

    cmdOutput = CkSsh_getReceivedText(ssh,channelNum,"utf-8");
    if (CkSsh_getLastMethodSuccess(ssh) == FALSE) {
        printf("%s\n",CkSsh_lastErrorText(ssh));
        CkSsh_Dispose(ssh);
        return;
    }

    printf("%s\n",cmdOutput);

    CkSsh_Disconnect(ssh);


    CkSsh_Dispose(ssh);

    }