(C) hacienda.go.cr Refrescar un Token

Refreshes an access token for the Recepción de Comprobantes Electrónicos del Ministerio de Hacienda (Costa Rica)

Note: This example requires Chilkat v11.0.0 or greater.

For more information, see https://www.hacienda.go.cr/ATV/ComprobanteElectronico/docs/esquemas/2016/v4.3/Guia_IdP.pdf

Chilkat C/C++ Library Downloads
MS Visual C/C++ C++ Builder Linux C/C++ Alpine Linux C/C++	MacOS C/C++ iOS C/C++ Android C/C++ MinGW C/C++

#include <C_CkJsonObject.h>
#include <C_CkHttp.h>
#include <C_CkHttpRequest.h>
#include <C_CkHttpResponse.h>
#include <C_CkStringBuilder.h>

void ChilkatSample(void)
    {
    BOOL success;
    HCkJsonObject jsonToken;
    HCkHttp http;
    HCkHttpRequest req;
    HCkHttpResponse resp;
    HCkStringBuilder sbResponseBody;
    HCkJsonObject jResp;
    int respStatusCode;
    const char *access_token;
    int expires_in;
    const char *id_token;
    int not_before_policy;
    int refresh_expires_in;
    const char *refresh_token;
    const char *session_state;
    const char *token_type;

    success = FALSE;

    // This example assumes the Chilkat API to have been previously unlocked.
    // See Global Unlock Sample for sample code.

    // It is assumed we previously obtained an OAuth2 access token.
    // This example loads the JSON access token file 
    // saved by this example: Get hacienda.co.cr OAuth2 Access Token

    jsonToken = CkJsonObject_Create();
    success = CkJsonObject_LoadFile(jsonToken,"qa_data/tokens/hacienda_cr.json");
    if (success != TRUE) {
        printf("Failed to load constantContact.json\n");
        CkJsonObject_Dispose(jsonToken);
        return;
    }

    // The access token JSON looks like this:

    // {
    //   "access_token": "ey....",
    //   "expires_in": 300,
    //   "id_token": "ey....",
    //   "not-before-policy": 0,
    //   "refresh_expires_in": 1800,
    //   "refresh_token": "ey...",
    //   "session_state": "...",
    //   "token_type": "bearer"
    // }

    http = CkHttp_Create();

    // Implements the following CURL command:

    // curl -X "POST" "https://idp.comprobanteselectronicos.go.cr/auth/realms/rut-stag/protocol/openid-connect/token" \
    //  -H "Content-Type: application/x-www-form-urlencoded; charset=utf-8" \
    //  --data-urlencode "client_id=api-stag" \
    //  --data-urlencode "refresh_token=ey..." \
    //  --data-urlencode "grant_type=refresh_token"

    // Use the following online tool to generate HTTP code from a CURL command
    // Convert a cURL Command to HTTP Source Code

    req = CkHttpRequest_Create();
    CkHttpRequest_putHttpVerb(req,"POST");
    CkHttpRequest_putPath(req,"/auth/realms/rut-stag/protocol/openid-connect/token");
    CkHttpRequest_putContentType(req,"application/x-www-form-urlencoded");
    CkHttpRequest_AddParam(req,"client_id","api-stag");
    CkHttpRequest_AddParam(req,"refresh_token",CkJsonObject_stringOf(jsonToken,"refresh_token"));
    CkHttpRequest_AddParam(req,"grant_type","refresh_token");

    resp = CkHttpResponse_Create();
    success = CkHttp_HttpReq(http,"https://idp.comprobanteselectronicos.go.cr/auth/realms/rut-stag/protocol/openid-connect/token",req,resp);
    if (success == FALSE) {
        printf("%s\n",CkHttp_lastErrorText(http));
        CkJsonObject_Dispose(jsonToken);
        CkHttp_Dispose(http);
        CkHttpRequest_Dispose(req);
        CkHttpResponse_Dispose(resp);
        return;
    }

    sbResponseBody = CkStringBuilder_Create();
    CkHttpResponse_GetBodySb(resp,sbResponseBody);
    jResp = CkJsonObject_Create();
    CkJsonObject_LoadSb(jResp,sbResponseBody);
    CkJsonObject_putEmitCompact(jResp,FALSE);

    printf("Response Body:\n");
    printf("%s\n",CkJsonObject_emit(jResp));

    respStatusCode = CkHttpResponse_getStatusCode(resp);
    printf("Response Status Code = %d\n",respStatusCode);
    if (respStatusCode >= 400) {
        printf("Response Header:\n");
        printf("%s\n",CkHttpResponse_header(resp));
        printf("Failed.\n");
        CkJsonObject_Dispose(jsonToken);
        CkHttp_Dispose(http);
        CkHttpRequest_Dispose(req);
        CkHttpResponse_Dispose(resp);
        CkStringBuilder_Dispose(sbResponseBody);
        CkJsonObject_Dispose(jResp);
        return;
    }

    // Sample JSON response:
    // (Sample code for parsing the JSON response is shown below)

    // {
    //   "access_token": "ey....",
    //   "expires_in": 300,
    //   "id_token": "ey....",
    //   "not-before-policy": 0,
    //   "refresh_expires_in": 1800,
    //   "refresh_token": "ey...",
    //   "session_state": "...",
    //   "token_type": "bearer"
    // }

    // Sample code for parsing the JSON response...
    // Use the following online tool to generate parsing code from sample JSON:
    // Generate Parsing Code from JSON

    // Chilkat functions returning "const char *" return a pointer to temporary internal memory owned and managed by Chilkat.
    // See this example explaining how this memory should be used: const char * functions.

    access_token = CkJsonObject_stringOf(jResp,"access_token");
    expires_in = CkJsonObject_IntOf(jResp,"expires_in");
    id_token = CkJsonObject_stringOf(jResp,"id_token");
    not_before_policy = CkJsonObject_IntOf(jResp,"not-before-policy");
    refresh_expires_in = CkJsonObject_IntOf(jResp,"refresh_expires_in");
    refresh_token = CkJsonObject_stringOf(jResp,"refresh_token");
    session_state = CkJsonObject_stringOf(jResp,"session_state");
    token_type = CkJsonObject_stringOf(jResp,"token_type");

    // Save the new JSON access token response to a file.
    success = CkJsonObject_WriteFile(jResp,"qa_data/tokens/haciendda_cr.json");


    CkJsonObject_Dispose(jsonToken);
    CkHttp_Dispose(http);
    CkHttpRequest_Dispose(req);
    CkHttpResponse_Dispose(resp);
    CkStringBuilder_Dispose(sbResponseBody);
    CkJsonObject_Dispose(jResp);

    }